Hello tout le monde,

A propos de cette version 8.2, .....elle est disponible au téléchargement.
Pas mal de nouveautés à noter !!!
Moi qui était déçu de la v8, il va falloir que je révise mon jugement.


A bientôt

Stéphane Péneau
CASAWAVE


> -----Message d'origine-----
> De : samplitude-fr@... [mailto:samplitude-fr@...]
> De la part de Christophe Chenevard
> Envoyé : mardi 31 mai 2005 10:16
> À : ML Samplitude
> Objet : [samplitude-fr] Readme de la 8.2
>
> Re
>
> En fait, il y a un fichier readme qui parle des nouveautés et ce fichier
> est disponible séparément de la mise à jour :
>
> En voici un copier-coller :
>
>
>
> 05/18/2005 Samplitude 8.2
>
> -There’s no updated English 8.2 help file available yet, please have a
> look at the version 8.2 info center at http://www.samplitude.com for
> further information.
>
>
> - Enhanced Take Manager
>
> General:
> The Take Manager appears in the new manager dialog as a further tab and
> can therefore always remain open.
>
> When the object is activated the takes matching the object are displayed
> for standard filters.
> With multiple selections (e.g. with multitrack recordings) the last
> clicked object is used.
>
>
> Creating takes while recording remains the same. Before recording, the
> take is either named manually or automatically (e.g during punch-in/loop
> recording).
> The Take Manager can then remain open. After recording, the new take is
> automatically displayed in the Take Manager.
>
> Following destructive effect calculations, a new take is also created
> and becomes visible in the Take Manager immediately.
>
> The take is now saved with the VIP. This also enables use of the "Each
> take in new file" function, which allows you to exchange the takes after
> reloading the VIPs.
>
>
> Take Exchange
> -1. The take is exchanged by checking the box preceding the currently
> used take. By default, multi-selection exchanges all objects. With this
> option switched off only the current track is changed.
>
> -2. Furthermore the takes can also be exchanged directly in the VIP via
> ctrl+right-click on an object. All matching takes are displayed in a
> special context menu.
>
>
> -Take Composer
> -Selected takes are positioned above each other in a new Take Composer
> window (from track 2), all visible takes are used now if none or only
> one take is selected
> -The current take is displayed in track 1 as well (Solo activated)
> -The take is played back together with the initial VIP when pressing the
> Space bar. Ctrl+Space either plays back the selected object (Solo track
> is then ignored) or the complete
> Take Composer.VIP, if no object is selected
> -Solo lets you easily switch between takes (Solo is default set to
> exclusive, normal Solo with Shift+Alt)
> - Shift-C (Copy to …) copies selected range to first track
> -Special function: modified scissors tool for fast cutting of take
> sections into the first track. Simply click on the selected In Point
> with the corresponding tool.
> -When closing the project, the first non-muted track can be transferred
> back to the initial project
> - re-transfer to original project is done between punch markers, this
> way you can extend the working range by moving the markers
> -direct access from arranger by object context menu (right click
> ->select takes) or take selection menu with ctrl right click
>
>
> Further new functions in the Take Manager:
> -Final destructive of a take with corresponding treatment of the undo
> chain
> -Renaming of takes
>
>
>
> - Advanced track functionality
>
> - Folder tracks
> -Command "Track->Insert->New Folder"
> - Empty folder is inserted above the active track
> - If tracks are selected via a range, they are inserted in the folder
> - Tracks can be moved in the folder by drag & drop
> -Folder tracks may be used for visual structuring and grouping of
> certain processes:
> -contained tracks can be hidden together by using the track size button
> of the folder
> track
> - Switch Mute, Solo, Lock, Volume, Pan together
> - Joint Record switch (in this case the indicated condition
> corresponds with
> the first track of the folder. Of course, switching is only
> possible with different
> input devices)
> - Usually you can see all tracks in the folder
> - range selection is carried out across all tracks -> range-based cut
> operations
> - An included track can be used as a reference track per track menu
> - All objects of this track are copied into the folder and
> can be used there for joint
> object-based cutting operations
> -But only if the source material has been grouped
> beforehand!
> - All objects that may have been in the folder track will be
> deleted.
> -This also affects all object effects and object editor
> operations
> (some changes are only applied after clicking on Apply/OK)
> - Not visible in the Mixer
> - folders are ignored for track numbering in mixer and VIP
> - left border and contained tracks are highlighted with folder color
> - nested folders possible
>
>
> -Control grouping in the arranger/ mixer
> - Mute / Solo / Record /Monitoring / Volume / Pan / Lock / In+Output
> Device can now also be selected multiply in the arranger via Shift+Click
> or Control+Click and are then activated together
> - The Shift special functions for Mute (->Mute inactive)/Solo
> (->exclusive)/Record (->Record all) are still available via Shift+Alt
> just like in the Mixer
> - The controls can be grouped permanently by right-clicking and thereby
> opening the menu in the upper section (e.g. on Global Mute/Solo) or on
> the Group buttons in the Mixer.
> - Grouping is indicated by the selection marker or the group number
> respectively
> - The in or out devices for several tracks can now be changed together.
> When routed to one bus the routing order is then accounted for (i.e.
> from left to right and top to bottom only).
> - optional increment of record device with more than one record button
> selected
>
>
> -Track Display / Handling , new default skins:
> -Improved handling of track heights, particularly in conjunction with
> invisible
> tracks
> -neighboring tracks are now no longer changed
> -“Track maximize” works like the corresponding button in the arranger
> (default shortcut Alt-Enter)
> “Minimze none” sets all visible tracks to the same height
> -“Track minimize” command is no longer available, since large tracks are
> automatically minimized with the “Track maximize” command
> -Partial tracks are displayed at the top or lower screen border for
> softer vertical scrolling
> -Free space below the final track. Context menu for adding tracks
> available here
> (including "New MIDI track" command for preset MIDI input)
> -Optional track color-(->Track-Info-Dialog), if activated it’s used for
> -Track name in the arranger (skin-dependent)
> -Track name in the mixer (skin-dependent)
> -optional for audio object wave form (can be set in
> display options)
> -Folder track frame
> -optimized default skins:
> -track number can now be used for moving tracks even for small track
> heights
> -improved display for many visible tracks
>
>
> bugfixes:
> -drawing problems with hidden tracks –fixed
> -no change of track heigths when adding tracks
> -mixer selection was lost after using the mixer scroll bar -fixed
> -problems with grouping and alt shift - fixed
>
>
>
> Mixer / Effects
>
> -Vintage Effects Suite Pro:
> CORVEX : chorus-flanger
> ECOX : analog delay
> FILTOX : modulating filter
>
> - non blocking FX dialogs
> -all FX except Dynamics / Distortion in object / track
> -surround / EQ window close buttons now working as OK instead of Cancel
> -more than one EQ dialog available
> -Delay / Reverb non blocking
> - non blocking FX dialogs marked with application icon
>
>
> - Object FX extensions
> - Delay / Reverb available as object FX
> - object DX / VST plugins available as Pre / Post
> -improved behavior of object FX with denormalised audio material
>
>
> -Elastic Audio
> - improved frequency detection for quiet audio material, compatibility
> is maintained when loading older projects, detection is switched to new
> mode when applying new detection or resetting TS/PS effect
> - shift click multi selection of slices
> - graphics optimisation
> - close button now applies changes
> - redo
> - double click on slice opens slice editor
> - double click can be used to switch tracks
> - several fixes
>
> - frequency matching
> - new option to transfer frequencies with object FFT filter
> - set play cursor to source audio material -> new preset
> - set play cursor to destination audio material -> select preset
> - similar method for offline FFT Filter
>
> Surround:
> -surround volume fader in arranger scales all surround channels
> -surround volume automation (drawing only, all channels use one curve
> only)
> -surround bouncing to interleaved WAV now uses WaveFormatExtensible
> chunk and automatic switch to RF64 format when reaching 2 GB limit
> -visualisation in surround projects without stereo master now starts as
> surround visualisation
> -update of automated surround panner when moving the play cursor
>
>
> bugfixes:
> -problems with vocoder and ampsim after cut or freeze operations -fixed
> -play start problems of am-track –fixed
> -problems after leaving EQ dialog with return key - fixed
> -Elastic Audio: curve points at object borders could be displaced
> sometimes - fixed
> -object length in object editor did jump when switching Elastic Audio
> automation -fixed
> - several fixes for multiband dynamics
>
>
> MIDI / VST / VSTi / Rewire / Instruments
>
> MIDI Editor
> Editing
> - Notes can now be dragged forwards as well (start position is changed).
> - New modifier for note lengths can be pulled into the matrix:
> Shift: Sets equal lengths for all selected notes
> Ctrl: changes the lengths in a relative manner
> - Legato function for notes
> - MIDI panic function for played editor notes (click below MIDI keyboard
> or via shortcut)
> - Line tool for controller editor
>
>
> Display
> -option for MIDI channel colors
> - improved display of selected notes for velocity display and MIDI
> channel colors
> - improved grid display in controller editor
>
>
>
> Shortcuts
> - Shortcuts for tool selection in the Controller Editor
> - Key repeat is no longer unnecessarily stopped for zooming
> (Ctrl+Cursor)
> - Shortcuts: RETURN to close, ESC to cancel
> - 'Z' for temporary zoom mode
> - MIDI Editor shortcuts can be changed with shortcut editor, automatic
> consistency with VIP shortcuts like Zoom,…
> - CursorUp / Down changes pitch
> - current shortcut assignments are shown in tooltips.
>
>
> Event List / Numerical Editing
> - Edit fields now even effect multi selection for byte 2
> - "Position" edit field now effects non-note event (e.g. controller) as
> well as selected notes and other selected events simultaneously
> -direct editing in MIDI event list: relative editing by click and drag
> (except MIDI channel - always absolute), absolute editing by double
> click and value editing (except positions, which keeps note lengths).
> - display of selected non-note events by red line in grid – e.g. for
> exact positioning of program change events
>
>
>
> -MIDI punch / loop recording
> - now creating takes for take manager
> - MIDI Editor now receives correct update for overdub/replace recording
> from object opened in the recording
> - MIDI Punch recording (loop recording or. overdub/replace): now correct
> monitoring and no more wrong jumps
> -MIDI loop recording normal and replace: only complete loops are
> recorded (as with audio loop recording)
>
>
> - MIDI metronome uses tempo maps
>
>
> VST
> - Support for VST WaveShell (for Waves version 5 and above) including
> automation
> - improved parameter resolution with VST automation
> - Tempo Maps for VST / Rewire
> - VST Fx receive MIDI input while monitoring
> - improved display of VSTi and VSTi output names
> -improved automatical MIDI solo routing to VSTi audio tracks (isn’t
> performed anymore, when there are MIDI objects on the track, works for
> monitoring now)
> -latency compensation for Powercore and UAD VSTi instruments in
> non-monitoring mode
> - improved and accelerated Rewire client startup
>
> -Robota:
> - improved BPM Sync
> - complete saving / loading of setups with project
>
> Bugfixes
> -problems when loading very short MIDI files – fixed
> - VSTi monitoring with FX did activate audio monitoring -fixed
> - zooming beyond MIDI object borders -fixed
> - zoom in keeps play position visible
> - graphics refresh for range changes
> - shortcuts for destructive MIDI file editing
> - "Open Object Editor " and "Track Options…" didn’t always use the
> current object -fixed
> - casual display jump to current note - fixed
> - Event-Chasing could send MIDI to more several channels -fixed
> - Rewire: note on with velocity 0 is now changed to note off (Reason
> couln’t understand these)
> - MIDI metronome confusion when playing loops - fixed.
> - unnecessary reset of VSTi monitoring when switching windows -fixed
>
>
>
> -General:
> Shortcut editor:
> -tree structure for better overview
> -search functions for menu commands and shortcuts
> -integration of MIDI editor commands, mouse wheel functions, temporary
> hotkeys (K,L,…) and
> several options
> -new temporary snap key for switching snap behaviour
> -several options for displaying or exporting shortcut list
>
>
> Manager:
> -color highlighting for current or last play position in marker or
> objects manager
> -new track manager options (inactive, exclusive solo)
> -improved sort order for markers ( 9 before 10)
>
>
> -playback /record
> -Automatic punch marker for punch-in recording with loop
> -Optimized loop recording (objects are only created and drawn after
> completed loop cycles)
> -new functionality of O-Ton Mode: with additionally activated CD
> Arrangement Mode, CD markers are used instead of objects
> -display of mutes caused by trackspeed overloads with a „.“ after
> playback error display
> -MIDI sync without (possibly invalid) time stamp
>
>
> file handling / bouncing / CD burning
> -new options to set track names from object names or object file names
> in menu
> „track info dialog -> file name -> all“
> -freeze format options in bouncing dialog
> - improved loading of projects with changed drive letters , WAV files
> are additionally searched in drive of VIP or in alternate drive after
> manual selection of first new WAV file
> -new CD-R burning speed detection, ini option for using old CD-R speed
> recognition
> [Setup]
> OldCDBurnSpeed=1
>
> -display / colors
> -Changed object color is now also displayed when the Object Editor is
> opened
> -new option for system dialog -> colors -> reset: „Set Object
> Background to track colors “ (may reset object sample color if equal and
> switches off „Track colors “ option for wave display
> -all color picker dialogs now with right click menu for color presets
>
> -extended zoom history:
> -any zoom out after zooming in by vertical mouse drag in grid, by zoom
> lasso or zoom to range resets to original zoom level or positions (can
> be bypassed with ctrl click to arranger zoom out button)
>
> -video
> - improved time resolution for video frame display (were 22 samples off
> before)
> - improved video timeline: single frames for high zoom levels
> -File drag’n’drop in media link dialog
>
>
> HW Control Panel:
> -new function for jump to markers or CD markers (for up tp 32 markers,
> set number in track edit)
> -new function for selecting mixer snapshots
>
>
> - new Windows domain administration
> - new option for Tap BPM in transport window
> -ini entry for disabling of mixer following active track
> [Factors]
> DisableMixerFollowArranger=1
>
>
>
> Bugfixes:
> -several DeadLocks for Undo during playback– fixed
> -Card-dependant problems with ASIO drivers (e.g. clicking when opening
> the ASIO control panel) – fixed
> - Record status of objects was not deleted when the recording was
> stopped using the toolbar button – fixed
> - Problems with the Declicker preset - Extension *.dclk in the Declipper
> (*.dcl) – fixed
> -casual manager hangups- fixed
>
> -improved behavior at record stop caused by full hard discs – fixed
> -improved behavior with terminated or non-responding dongle driver
> -FTP download crash when closing FTP dialog while downloading -fixed
> - improved unfreeze with moved projects
> - record switch in track manager didn’t work for MIDI –fixed
> - Real export: mono/stereo options were switched - fixed
> - audio recording as sync slave did show MIDI dialog - fixed
> - mute / solo in track manager for multi selection were slow due to
> several undo steps -fixed
> - freeze cancel didn’t work for multiple objects -fixed
> - vertical scroll bar could hang with zoom lasso -fixed
> - ZLM monitoring with „Record while Play“ didn’t work since 8.1 -fixed,
> ZLM can now be switched on and off during recording
> -VIP and zoom snapshots of template VIP’s didn’t work -fixed
> -FX monitoring did consume CPU power even if RecMon was switched off –
> fixed
> -„Multi I/O Stereo“ preset didn’t work after mono preset - fixed
> - missing CD index renumbering after ripple - fixed
> - SEKD Declicker didn’t work since 8.1 - fixed
> - play solo problems in object editor - fixed
> - play solo did reset loop flag - fixed
> - loop mode wasn’t saved with the project- fixed
> - problem with time edit window on 2nd monitor - fixed
> - 2 channel surround was not restored from mixer snapshots– fixed
> - metronome in punchin mode couldn’t be switched from transport window -
> fixed
> -snap problems with Feet / Frames - fixed
> -copy of markers between VIP and WAV project often resulted in doubled
> markers
> - fixed
> -closing of object-DX/VST dialogs when creating an undo step (e.g..
> Solo/Mute…)-fixed
> -"TOC list" – casual wrong time display when called from marker manager
> - fixed
> - small record window: enter key did stop recording -fixed
> - punch recordings < 300ms where ignored - fixed
> - trackspeed: increased disc load when using object FX with latency -
> fixed
> - trackbouncing with trackspeed: increased disc load when using FX with
> latency - fixed
> - wrong column captions in file browser–fixed
> - display problems in surround panner after minimizing –fixed
>
>
>
>
>
> March 9, 2005 Sequoia 8.11
>
> -zoom lasso can be switched to default vertical zoom without shift key
> with ini entry
> [Factors]
> ToggleKeyForZoomModeWithoutShift=1
>
>
>
> Bugfixes:
> -shortened name for VST plugins containing an additional
> dot–fixed
> -problems with Multiband-Enhancer –fixed
> -problems with loading of pitchshift settings–fixed
> -problems with pitch factor > 2 –fixed
> -casual missing plugin slots–fixed
> -right VSTi mono outputs couldn’t be selected via menu–fixed
> -problems with object gain or other pre FX Insert plugins with
> 16 bit files –fixed
> -improved handling of plugins with invalid-float-buffer output
> -problems with AmpSim when using a sample rate different from
> 44.1 kHz –fixed
> -casual crashes in mixer when using long track names–fixed
> -casual trackspeed problems when using object FX–fixed
> -problems when loading tempo markers from MIDI files not
> starting at project start–fixed
> -casual resampling was applied twice when using destructive FX
> with resampled objects–fixed
> -improved tuner for low level audio input
> -large record offset on some systems – fixed
> -problems with audio metronome output to unused audio device -
> fixed
> -some bugfixes for am-suite plugins and robota
>
>
>
> Sequoia 8.1
>
>
> - Wibu CodeMeter copy protection (CM Stick)
> - New copy protection with advanced possibilities in terms of license
> management and updates will be used for Samplitude and Sequoia
> - Start the supplied CmRuntimeUser.exe to install the driver (if
> not using the v8.1 installation CD)
> - CodeMeter is only available as a USB device (CodeMeter stick, short:
> CM Stick)
> - CodeMeter uses internal TCP/IP communication with localhost and thus
> TCP/IP is needed. This may cause problems or warning messages when using
> firewalls.
> - CodeMeter always installs a flash drive since there are CM sticks with
> flash memory available, but the supplied CM stick doesn’t have any and
> still shows 2 MB memory – any data stored there will be lost
> -red LED lights up during program start and together with record button
> of transport window
> -green LED blinks every 15s
> -start screen for solving some of the common problems with CM stick
>
>
> Sequoia:
> -extended settings for S/D cut
> -copy markers optionally for CD markers only
> -objects can be unselected, selected or opended in
> crossfade editor
> - Improved opening of the Crossfade Editor in connection with locked
> tracks (showing the first unlocked track)
>
>
> -bugfixes:
> -sourcepaths weren’t adapted for moved projects -fixed
> - "Undo Cut" now works for all grouped objects.
> - With the “Play Fade In/Out without Fade” command, object volume was
> not accounted for, which could lead to jumps in volume – fixed
> -source record button was casually switched off while recording with
> active “transfer mixer settings”
> option -fixed
>
>
>
> Playback / Recording / Monitoring
> - When dithering at 16 or 24 bits, redundant bits were not deleted if
> the audio device was opened with a higher bit rate (e.g. HDSP with
> ASIO). This would lead to, for instance, wrong messages in DigiCheck
> - Current dithering settings (16bit output options, among others) are
> now shown in the dithering menu
> - New monitoring option in the System/Record dialog for quick, exclusive
> ASIO punch-in monitoring – if activated, the playback signal is switched
> to ASIO latency when punching-in under ASIO. This means, every audio
> output is exclusively used either for monitoring or playback, which
> naturally only makes sense with Multi I/O
> - When activating a track-monitoring button under ASIO, record
> monitoring is now automatically activated
> - ASIO monitoring is switched off when closing a project or the
> program
> -VSTi and FX in monitoring mode are now considered for display of CPU
> usage
> -monitoring can be switched of while recording
> -playback / record device setup:
> -shift click for activation of all previous and deactivation of all
> following devices
> -separate names for left and right channel with „++“ e.g. „Input left ++
> Input right“)
>
>
>
>
>
>
> Bug fixes:
> - Problems displaying and monitoring during track punch-in – fixed
> - Problems resulting from multi-threading safeguarding during SoftwareFX
> monitoring – fixed.
> - Problems with SoftwareFX monitoring when changing
> volume/pan/EQ – fixed
> - Take Manager problems with multi-track recordings – fixed
> - When playing back just recorded material while recording, the
> cursor couldn’t be moved - fixed
> - Diverse problems with inconsistent monitoring states – fixed
> -several problems when resetting/renaming ASIO devices - fixed
> -problems with MixToFile for MultiI/O -fixed
> -rare bug with missing record data after a rejected take-fixed
> -casual problems in O-Ton mode (jump to project start) -fixed
> -wrong take naming for punchin -fixed
>
>
>
>
> File handling / Export / Bouncing / Freeze
> -dialog for sample rate adaption when importing audio files
> - Warning about projects outside of the VIP directory now also for MP3s
> - Revised FTP download dialog with multi-server administration
> - Display of the audio format in the File and Object Manager
> - TrackSpeed handling for faster track bouncing and CD burning, can be
> switched off with
> [Setup]
> NoTrackSpeedForCDBurning=1
> NoTrackSpeedForBouncing=1
> -TrackManager: TrackFreeze switchable (multi-selection too)
> -Lame MP3-Encoder for better quality
> -MP3-ID3-Tag is preserved during batch processing
> -TOC and ISRC tests now additionally after ISRC input or before DDP
> export
> -warning when deleting HDP used in open VIPs
> -interleaved file import and export (for surround trackbouncing)
>
> Bug fixes:
> - DVD Audio, Digas-Export: Bounce occurrence doesn’t begin at the first
> track mark, but rather at the project beginning, possibly with a digital
> zero at the beginning of the DVD – fixed
> -vanishing sound after several minutes when using surround
> export with resampling–fixed
> -problem with >2GB files when using the copy/move to project folder
> options -fixed
> -files outside project folder was only triggered with WAV files –fixed
> -object freeze with activated handle length was restricted by neighbour
> objects - fixed
> -problems with Freeze and UAD/Powercore –VST plugins –fixed, and
> you can now enable copying of these
> plugins with „1“ or „!“ in plugin dialog
>
>
>
> Mixer / FX / Object Editor
> - Expanded use of Roosim impulse responses and vocoder samples: with the
> SaveCompleteVIP command these can be optionally included when saving in
> the FX preset directory of the VIP folder; they can then also be loaded
> from there
> - By OK or the “Apply to all” command, the object AUXs are also
> completely transferred if changes are made
> - In the DirectX/VST-FX plug-in dialog, the complete plug-in setups,
> including pre/post and VST settings are saved
> - Improved mixer-link behavior – now more neighboring tracks can be
> grouped together
> - Display of the active track in the mixer for better orientation (red
> border on the track number); now also possible to change by clicking on
> a number in the mixer
> - DX/VST-FX are also now shown for surround busses in mixer slots
> -warning before surround export with inconsistent device setup
> -remembering of VST/VSTi plugin window positions and restore of open
> DX/VST/VSTi –windows after reloading of projects
>
>
>
> Bug fixes:
> - When saving multi-band dynamics with activated solo band, only the
> first solo band was used after loading – fixed
> - EQ cancel didn’t work – fixed
> - If a track was completely panned to the right, then on the left a drop
> of –90dB resulted – fixed
> - Various problems with 2-channel surround panning – fixed
> - Surround Panner flickered during redraw – fixed
> -RoomSim sometimes only produced silence -fixed
> -MultibandDynamics: problems with MaxSubbass preset -fixed
> -surround preset name wasn’t saved with the project -fixed
> -surround bouncing results sometimes placed in wrong VIP
> track–fixed
> -mixer setup with assignment of individual tracks to surround
> channel didn’t work–fixed
> -Remix Agent didn’t work for mono objects + several crashes-fixed
> -several RoomSim problems -fixed
> -problems with object latency compensation for several DX plugins –fixed
> -problems with AUX send routing after loading of MIDI files -fixed
> -some multiband fixes
> -no reset of surround peakmeters for object surround at object
> end–fixed
>
>
> MIDI /VSTi /Rewire
> -Project BPM matching for MIDI Objects now accomplished without
> time-stretching
> - Improved beat ruler
> -definable Rewire MIDI bus (use MIDI channel box in arranger)
>
> MIDI Editor
> -usage of note names in MIDI and drum editor
> -channel, byte1, byte2 edit fields can now be changed via mousewheel
> -note keyboard now also sends MIDI notes
> - Flip-out Drum Editor tracks to change settings; also for lower track
> levels
> - Select all notes from a certain location onwards with:
> Shift+double-click
> - Select all notes of a certain pitch from a certain location onwards
> with: Alt+double-click
>
>
>
> VSTi
> - Improved playback synchronization in VSTi monitoring mode
> - Improved MidiThru handling of multi-output VSTi (among others) through
> grouped switching processes
> - Improved operation with VSTi mono outputs
> - VSTi labels in Arranger with VSTi number
>
>
>
> Bug fixes:
> - Various rounding errors with MIDI events after moving Objects
> / bounce operations – fixed
> - Automatic attachment of VSTi output tracks sometimes resulted
> in a missing channel – fixed
> - VSTis with an odd number of outputs could not use the last channel –
> especially mono VSTis with only one output resulted in no sound – fixed
> - Various problems with hanging notes (e.g. deleting the
> previously-played note) – fixed
> - Temporary higher memory use during BPM adjustment cause by Shift+mouse
> movement over tempo markers - fixed
> - Improved SMF import (importing the MidiTrack names as Object names,
> improved functionality with tempo maps)
> -VSTi sometimes missing when burning a CD-fixed
> -MIDI Editor: size of contoller editor wasn’t restored after
> program restart-fixed
>
>
>
> Hardware Control Panel
> - Newly-supported slot functions for track EQ bands, AUX sends and
> plug-in slots (activate/deactivate) – here, with the slot, the number of
> the EQ band or AUX send is adjusted
> - Improved learning function: if the transport window or mixer is opened
> before the control panel and if one of the “Normal Send” functions is
> activated
> -Mixer On/Off
> -TrackVolumeFader
> -TrackMute
> -TrackSolo
> -TrackRecRdy
> -TrackAutomation
> -TrackSelect
> -FaderMaster
> -Play
> -Stop
> -Record
> -TrackVpot (Pan) + EQ+ AUX Sends
>
> General:
> -Copy/Cut operations without remaining Object borders
> - Improved functionality for grouped Objects during multi-track editing
> - English special version for Asian Windows should no longer be
> necessary
> - Alt+Track/Object Lock button switches an individual lock state without
> taking the grouping into account
> - Improved Arranger view in case track intervals were switched off
> - Audio Metronome: audio device can be set up in the system options
> -improved handling of object hotspot (snap to other objects or play
> cursor, new command to delete hotspot)
> -grabbing the object end will now snap with the object end in case the
> visible distance between start and end of the object is large enough (>
> 50 pixel)
> -pressing the right control key now allows to move the object content
> with the mouse, this also works for moving the object start, thisd
> feature can be switched off via ini setting:
> [Factors]
> ToggleKeyForChangeContent=0
> -unified handling for testing valid screen positions in connection with
> dual monitor setups for visualisation,
> mxer, tansport window, MIDI editor and plugin windows
> -vertical autoscroll for editing, improved vertical range selection
> including autoscroll, autoscroll for object lasso
>
>
> Bug fixes:
> - Temporary mouse mode modifiers stalled when the Object Editor was
> opened via double-click – fixed
> - In case volume adjustment is restricted for locked Objects, this now
> also applies to locked tracks
> -casual problems when using jump or range extension commands to object
> end –fixed
> -casually missing grid after undo –fixed
> -problems with feet+frames unit -fixed
> -problems with Alt shortcuts and Play Loop in manager windows
> –fixed
>
>
>
>
> November 26, 2004 Sequoia 8.01
>
> -Sequoia:
> - Problems with fade curves after an undo – fixed
> - Lack of surround presets for more than 6 channels – fixed
> - ini entry allows the Crossfade Editor to work with virtual waves
> [Factors]
> EnableSequoiaCFEditorForVirtualWaveEditing=1
>
>
> Note: with the new dongles (serial number begins with 8), under certain
> conditions, Sequoia 8.01 shows a warning due to problems with the Wibu
> driver included on the CD. In this case, (and only then), please install
> the current driver >4.10c from the Wibu website.
>
>
> -Surround:
> - Surround: problematic automation in Dolby Surround Mode – fixed
> - Surround: mistake-ridden Parallel Source Mirror Mode – fixed
> - Problems with surround FX when loading mixer snapshots – fixed
>
>
> -MIDI /VST :
> -MIDI Controller now takes into account the adjusted MIDI Out channel
> on the track
> (especially important for volume control with the volume fader)
> - Object time-stretch factor was not saved – fixed
> - Problems loading MIDI files on multiple tracks – fixed
> - Problems loading MIDI files without tempo info – now a default of 120
> BPM is used
> - Problems when using more than 16 VSTis in one project - fixed
> - Deleting a VST-FX from the list of available plug-ins didn’t
> work properly - fixed
> - There is a Robota Drum Map in the MXSynth\Robota directory
>
> - Various updates and bug fixes for Elastic Audio, Robota, Analog
> Modelling Suite and DVDAudio
>
> - General:
> - With a new installation (and after deleting the ini file), the use of
> half-transparent displays is activated by default – this is generally
> recommended due to various hardware incompatibility problems
> - Asks if you want to switch into 16bit mode if an error occurs upon
> opening a device in 24bit; also asks to switch into 24bit mode for
> recordings with more than 16bit resolution
> - Punch-in problems during punch-out with Playstop – fixed
> - Problems after moving the cursor in Punch-In Mode during playback –
> fixed
> - Problems with virtual wave editing >2GB – fixed
> - Problems with Object reverb – fixed
> - Warning for WAV exchange of looped Objects – fixed
> - Problems with busses when loading from mixer snapshots – fixed
> - EQ artifacts after changing parameters while playing – fixed
> - Problems with HQ Object resampling at 192 kHz – fixed
> - Object AUX Dialog Fader opens the Timestretch Dialog – fixed
> - Changed shortcut: Shift-Alt-S for exclusive solo (same as
> Shift-Alt-mouse-click)
> - Crashed when selecting surround mixer setups during virtual wave
> editing – fixed (meaning, this is no longer available)
> - Possibility to enter more precise BPM value in the Transport, Project
> Info, Beat and Tempo Maker Dialogs
> - More precise accounting of ASIO driver latency messages for
> Record-while-Playback
> - Various performance updates for playback and GUI
> - Various crashes – fixed
>
>
>
> Le Site des utilisateurs de Samplitude :
> http://perso.easynet.fr/~teknico/samplitude
> Liens Yahoo! Groupes
>
>
>
>
>