Re

En fait, il y a un fichier readme qui parle des nouveautés et ce fichier
est disponible séparément de la mise à jour :

En voici un copier-coller :



05/18/2005 Samplitude 8.2

-There’s no updated English 8.2 help file available yet, please have a
look at the version 8.2 info center at http://www.samplitude.com for
further information.


- Enhanced Take Manager

General:
The Take Manager appears in the new manager dialog as a further tab and
can therefore always remain open.

When the object is activated the takes matching the object are displayed
for standard filters.
With multiple selections (e.g. with multitrack recordings) the last
clicked object is used.


Creating takes while recording remains the same. Before recording, the
take is either named manually or automatically (e.g during punch-in/loop
recording).
The Take Manager can then remain open. After recording, the new take is
automatically displayed in the Take Manager.

Following destructive effect calculations, a new take is also created
and becomes visible in the Take Manager immediately.

The take is now saved with the VIP. This also enables use of the "Each
take in new file" function, which allows you to exchange the takes after
reloading the VIPs.


Take Exchange
-1. The take is exchanged by checking the box preceding the currently
used take. By default, multi-selection exchanges all objects. With this
option switched off only the current track is changed.

-2. Furthermore the takes can also be exchanged directly in the VIP via
ctrl+right-click on an object. All matching takes are displayed in a
special context menu.


-Take Composer
-Selected takes are positioned above each other in a new Take Composer
window (from track 2), all visible takes are used now if none or only
one take is selected
-The current take is displayed in track 1 as well (Solo activated)
-The take is played back together with the initial VIP when pressing the
Space bar. Ctrl+Space either plays back the selected object (Solo track
is then ignored) or the complete
Take Composer.VIP, if no object is selected
-Solo lets you easily switch between takes (Solo is default set to
exclusive, normal Solo with Shift+Alt)
- Shift-C (Copy to …) copies selected range to first track
-Special function: modified scissors tool for fast cutting of take
sections into the first track. Simply click on the selected In Point
with the corresponding tool.
-When closing the project, the first non-muted track can be transferred
back to the initial project
- re-transfer to original project is done between punch markers, this
way you can extend the working range by moving the markers
-direct access from arranger by object context menu (right click
->select takes) or take selection menu with ctrl right click


Further new functions in the Take Manager:
-Final destructive of a take with corresponding treatment of the undo
chain
-Renaming of takes



- Advanced track functionality

- Folder tracks
-Command "Track->Insert->New Folder"
- Empty folder is inserted above the active track
- If tracks are selected via a range, they are inserted in the folder
- Tracks can be moved in the folder by drag & drop
-Folder tracks may be used for visual structuring and grouping of
certain processes:
-contained tracks can be hidden together by using the track size button
of the folder
track
- Switch Mute, Solo, Lock, Volume, Pan together
- Joint Record switch (in this case the indicated condition
corresponds with
the first track of the folder. Of course, switching is only
possible with different
input devices)
- Usually you can see all tracks in the folder
- range selection is carried out across all tracks -> range-based cut
operations
- An included track can be used as a reference track per track menu
- All objects of this track are copied into the folder and
can be used there for joint
object-based cutting operations
-But only if the source material has been grouped
beforehand!
- All objects that may have been in the folder track will be
deleted.
-This also affects all object effects and object editor
operations
(some changes are only applied after clicking on Apply/OK)
- Not visible in the Mixer
- folders are ignored for track numbering in mixer and VIP
- left border and contained tracks are highlighted with folder color
- nested folders possible


-Control grouping in the arranger/ mixer
- Mute / Solo / Record /Monitoring / Volume / Pan / Lock / In+Output
Device can now also be selected multiply in the arranger via Shift+Click
or Control+Click and are then activated together
- The Shift special functions for Mute (->Mute inactive)/Solo
(->exclusive)/Record (->Record all) are still available via Shift+Alt
just like in the Mixer
- The controls can be grouped permanently by right-clicking and thereby
opening the menu in the upper section (e.g. on Global Mute/Solo) or on
the Group buttons in the Mixer.
- Grouping is indicated by the selection marker or the group number
respectively
- The in or out devices for several tracks can now be changed together.
When routed to one bus the routing order is then accounted for (i.e.
from left to right and top to bottom only).
- optional increment of record device with more than one record button
selected


-Track Display / Handling , new default skins:
-Improved handling of track heights, particularly in conjunction with
invisible
tracks
-neighboring tracks are now no longer changed
-“Track maximize” works like the corresponding button in the arranger
(default shortcut Alt-Enter)
“Minimze none” sets all visible tracks to the same height
-“Track minimize” command is no longer available, since large tracks are
automatically minimized with the “Track maximize” command
-Partial tracks are displayed at the top or lower screen border for
softer vertical scrolling
-Free space below the final track. Context menu for adding tracks
available here
(including "New MIDI track" command for preset MIDI input)
-Optional track color-(->Track-Info-Dialog), if activated it’s used for
-Track name in the arranger (skin-dependent)
-Track name in the mixer (skin-dependent)
-optional for audio object wave form (can be set in
display options)
-Folder track frame
-optimized default skins:
-track number can now be used for moving tracks even for small track
heights
-improved display for many visible tracks


bugfixes:
-drawing problems with hidden tracks –fixed
-no change of track heigths when adding tracks
-mixer selection was lost after using the mixer scroll bar -fixed
-problems with grouping and alt shift - fixed



Mixer / Effects

-Vintage Effects Suite Pro:
CORVEX : chorus-flanger
ECOX : analog delay
FILTOX : modulating filter

- non blocking FX dialogs
-all FX except Dynamics / Distortion in object / track
-surround / EQ window close buttons now working as OK instead of Cancel
-more than one EQ dialog available
-Delay / Reverb non blocking
- non blocking FX dialogs marked with application icon


- Object FX extensions
- Delay / Reverb available as object FX
- object DX / VST plugins available as Pre / Post
-improved behavior of object FX with denormalised audio material


-Elastic Audio
- improved frequency detection for quiet audio material, compatibility
is maintained when loading older projects, detection is switched to new
mode when applying new detection or resetting TS/PS effect
- shift click multi selection of slices
- graphics optimisation
- close button now applies changes
- redo
- double click on slice opens slice editor
- double click can be used to switch tracks
- several fixes

- frequency matching
- new option to transfer frequencies with object FFT filter
- set play cursor to source audio material -> new preset
- set play cursor to destination audio material -> select preset
- similar method for offline FFT Filter

Surround:
-surround volume fader in arranger scales all surround channels
-surround volume automation (drawing only, all channels use one curve
only)
-surround bouncing to interleaved WAV now uses WaveFormatExtensible
chunk and automatic switch to RF64 format when reaching 2 GB limit
-visualisation in surround projects without stereo master now starts as
surround visualisation
-update of automated surround panner when moving the play cursor


bugfixes:
-problems with vocoder and ampsim after cut or freeze operations -fixed
-play start problems of am-track –fixed
-problems after leaving EQ dialog with return key - fixed
-Elastic Audio: curve points at object borders could be displaced
sometimes - fixed
-object length in object editor did jump when switching Elastic Audio
automation -fixed
- several fixes for multiband dynamics


MIDI / VST / VSTi / Rewire / Instruments

MIDI Editor
Editing
- Notes can now be dragged forwards as well (start position is changed).
- New modifier for note lengths can be pulled into the matrix:
Shift: Sets equal lengths for all selected notes
Ctrl: changes the lengths in a relative manner
- Legato function for notes
- MIDI panic function for played editor notes (click below MIDI keyboard
or via shortcut)
- Line tool for controller editor


Display
-option for MIDI channel colors
- improved display of selected notes for velocity display and MIDI
channel colors
- improved grid display in controller editor



Shortcuts
- Shortcuts for tool selection in the Controller Editor
- Key repeat is no longer unnecessarily stopped for zooming
(Ctrl+Cursor)
- Shortcuts: RETURN to close, ESC to cancel
- 'Z' for temporary zoom mode
- MIDI Editor shortcuts can be changed with shortcut editor, automatic
consistency with VIP shortcuts like Zoom,…
- CursorUp / Down changes pitch
- current shortcut assignments are shown in tooltips.


Event List / Numerical Editing
- Edit fields now even effect multi selection for byte 2
- "Position" edit field now effects non-note event (e.g. controller) as
well as selected notes and other selected events simultaneously
-direct editing in MIDI event list: relative editing by click and drag
(except MIDI channel - always absolute), absolute editing by double
click and value editing (except positions, which keeps note lengths).
- display of selected non-note events by red line in grid – e.g. for
exact positioning of program change events



-MIDI punch / loop recording
- now creating takes for take manager
- MIDI Editor now receives correct update for overdub/replace recording
from object opened in the recording
- MIDI Punch recording (loop recording or. overdub/replace): now correct
monitoring and no more wrong jumps
-MIDI loop recording normal and replace: only complete loops are
recorded (as with audio loop recording)


- MIDI metronome uses tempo maps


VST
- Support for VST WaveShell (for Waves version 5 and above) including
automation
- improved parameter resolution with VST automation
- Tempo Maps for VST / Rewire
- VST Fx receive MIDI input while monitoring
- improved display of VSTi and VSTi output names
-improved automatical MIDI solo routing to VSTi audio tracks (isn’t
performed anymore, when there are MIDI objects on the track, works for
monitoring now)
-latency compensation for Powercore and UAD VSTi instruments in
non-monitoring mode
- improved and accelerated Rewire client startup

-Robota:
- improved BPM Sync
- complete saving / loading of setups with project

Bugfixes
-problems when loading very short MIDI files – fixed
- VSTi monitoring with FX did activate audio monitoring -fixed
- zooming beyond MIDI object borders -fixed
- zoom in keeps play position visible
- graphics refresh for range changes
- shortcuts for destructive MIDI file editing
- "Open Object Editor " and "Track Options…" didn’t always use the
current object -fixed
- casual display jump to current note - fixed
- Event-Chasing could send MIDI to more several channels -fixed
- Rewire: note on with velocity 0 is now changed to note off (Reason
couln’t understand these)
- MIDI metronome confusion when playing loops - fixed.
- unnecessary reset of VSTi monitoring when switching windows -fixed



-General:
Shortcut editor:
-tree structure for better overview
-search functions for menu commands and shortcuts
-integration of MIDI editor commands, mouse wheel functions, temporary
hotkeys (K,L,…) and
several options
-new temporary snap key for switching snap behaviour
-several options for displaying or exporting shortcut list


Manager:
-color highlighting for current or last play position in marker or
objects manager
-new track manager options (inactive, exclusive solo)
-improved sort order for markers ( 9 before 10)


-playback /record
-Automatic punch marker for punch-in recording with loop
-Optimized loop recording (objects are only created and drawn after
completed loop cycles)
-new functionality of O-Ton Mode: with additionally activated CD
Arrangement Mode, CD markers are used instead of objects
-display of mutes caused by trackspeed overloads with a „.“ after
playback error display
-MIDI sync without (possibly invalid) time stamp


file handling / bouncing / CD burning
-new options to set track names from object names or object file names
in menu
„track info dialog -> file name -> all“
-freeze format options in bouncing dialog
- improved loading of projects with changed drive letters , WAV files
are additionally searched in drive of VIP or in alternate drive after
manual selection of first new WAV file
-new CD-R burning speed detection, ini option for using old CD-R speed
recognition
[Setup]
OldCDBurnSpeed=1

-display / colors
-Changed object color is now also displayed when the Object Editor is
opened
-new option for system dialog -> colors -> reset: „Set Object
Background to track colors “ (may reset object sample color if equal and
switches off „Track colors “ option for wave display
-all color picker dialogs now with right click menu for color presets

-extended zoom history:
-any zoom out after zooming in by vertical mouse drag in grid, by zoom
lasso or zoom to range resets to original zoom level or positions (can
be bypassed with ctrl click to arranger zoom out button)

-video
- improved time resolution for video frame display (were 22 samples off
before)
- improved video timeline: single frames for high zoom levels
-File drag’n’drop in media link dialog


HW Control Panel:
-new function for jump to markers or CD markers (for up tp 32 markers,
set number in track edit)
-new function for selecting mixer snapshots


- new Windows domain administration
- new option for Tap BPM in transport window
-ini entry for disabling of mixer following active track
[Factors]
DisableMixerFollowArranger=1



Bugfixes:
-several DeadLocks for Undo during playback– fixed
-Card-dependant problems with ASIO drivers (e.g. clicking when opening
the ASIO control panel) – fixed
- Record status of objects was not deleted when the recording was
stopped using the toolbar button – fixed
- Problems with the Declicker preset - Extension *.dclk in the Declipper
(*.dcl) – fixed
-casual manager hangups- fixed

-improved behavior at record stop caused by full hard discs – fixed
-improved behavior with terminated or non-responding dongle driver
-FTP download crash when closing FTP dialog while downloading -fixed
- improved unfreeze with moved projects
- record switch in track manager didn’t work for MIDI –fixed
- Real export: mono/stereo options were switched - fixed
- audio recording as sync slave did show MIDI dialog - fixed
- mute / solo in track manager for multi selection were slow due to
several undo steps -fixed
- freeze cancel didn’t work for multiple objects -fixed
- vertical scroll bar could hang with zoom lasso -fixed
- ZLM monitoring with „Record while Play“ didn’t work since 8.1 -fixed,
ZLM can now be switched on and off during recording
-VIP and zoom snapshots of template VIP’s didn’t work -fixed
-FX monitoring did consume CPU power even if RecMon was switched off –
fixed
-„Multi I/O Stereo“ preset didn’t work after mono preset - fixed
- missing CD index renumbering after ripple - fixed
- SEKD Declicker didn’t work since 8.1 - fixed
- play solo problems in object editor - fixed
- play solo did reset loop flag - fixed
- loop mode wasn’t saved with the project- fixed
- problem with time edit window on 2nd monitor - fixed
- 2 channel surround was not restored from mixer snapshots– fixed
- metronome in punchin mode couldn’t be switched from transport window -
fixed
-snap problems with Feet / Frames - fixed
-copy of markers between VIP and WAV project often resulted in doubled
markers
- fixed
-closing of object-DX/VST dialogs when creating an undo step (e.g..
Solo/Mute…)-fixed
-"TOC list" – casual wrong time display when called from marker manager
- fixed
- small record window: enter key did stop recording -fixed
- punch recordings < 300ms where ignored - fixed
- trackspeed: increased disc load when using object FX with latency -
fixed
- trackbouncing with trackspeed: increased disc load when using FX with
latency - fixed
- wrong column captions in file browser–fixed
- display problems in surround panner after minimizing –fixed





March 9, 2005 Sequoia 8.11

-zoom lasso can be switched to default vertical zoom without shift key
with ini entry
[Factors]
ToggleKeyForZoomModeWithoutShift=1



Bugfixes:
-shortened name for VST plugins containing an additional
dot–fixed
-problems with Multiband-Enhancer –fixed
-problems with loading of pitchshift settings–fixed
-problems with pitch factor > 2 –fixed
-casual missing plugin slots–fixed
-right VSTi mono outputs couldn’t be selected via menu–fixed
-problems with object gain or other pre FX Insert plugins with
16 bit files –fixed
-improved handling of plugins with invalid-float-buffer output
-problems with AmpSim when using a sample rate different from
44.1 kHz –fixed
-casual crashes in mixer when using long track names–fixed
-casual trackspeed problems when using object FX–fixed
-problems when loading tempo markers from MIDI files not
starting at project start–fixed
-casual resampling was applied twice when using destructive FX
with resampled objects–fixed
-improved tuner for low level audio input
-large record offset on some systems – fixed
-problems with audio metronome output to unused audio device -
fixed
-some bugfixes for am-suite plugins and robota



Sequoia 8.1


- Wibu CodeMeter copy protection (CM Stick)
- New copy protection with advanced possibilities in terms of license
management and updates will be used for Samplitude and Sequoia
- Start the supplied CmRuntimeUser.exe to install the driver (if
not using the v8.1 installation CD)
- CodeMeter is only available as a USB device (CodeMeter stick, short:
CM Stick)
- CodeMeter uses internal TCP/IP communication with localhost and thus
TCP/IP is needed. This may cause problems or warning messages when using
firewalls.
- CodeMeter always installs a flash drive since there are CM sticks with
flash memory available, but the supplied CM stick doesn’t have any and
still shows 2 MB memory – any data stored there will be lost
-red LED lights up during program start and together with record button
of transport window
-green LED blinks every 15s
-start screen for solving some of the common problems with CM stick


Sequoia:
-extended settings for S/D cut
-copy markers optionally for CD markers only
-objects can be unselected, selected or opended in
crossfade editor
- Improved opening of the Crossfade Editor in connection with locked
tracks (showing the first unlocked track)


-bugfixes:
-sourcepaths weren’t adapted for moved projects -fixed
- "Undo Cut" now works for all grouped objects.
- With the “Play Fade In/Out without Fade” command, object volume was
not accounted for, which could lead to jumps in volume – fixed
-source record button was casually switched off while recording with
active “transfer mixer settings”
option -fixed



Playback / Recording / Monitoring
- When dithering at 16 or 24 bits, redundant bits were not deleted if
the audio device was opened with a higher bit rate (e.g. HDSP with
ASIO). This would lead to, for instance, wrong messages in DigiCheck
- Current dithering settings (16bit output options, among others) are
now shown in the dithering menu
- New monitoring option in the System/Record dialog for quick, exclusive
ASIO punch-in monitoring – if activated, the playback signal is switched
to ASIO latency when punching-in under ASIO. This means, every audio
output is exclusively used either for monitoring or playback, which
naturally only makes sense with Multi I/O
- When activating a track-monitoring button under ASIO, record
monitoring is now automatically activated
- ASIO monitoring is switched off when closing a project or the
program
-VSTi and FX in monitoring mode are now considered for display of CPU
usage
-monitoring can be switched of while recording
-playback / record device setup:
-shift click for activation of all previous and deactivation of all
following devices
-separate names for left and right channel with „++“ e.g. „Input left ++
Input right“)






Bug fixes:
- Problems displaying and monitoring during track punch-in – fixed
- Problems resulting from multi-threading safeguarding during SoftwareFX
monitoring – fixed.
- Problems with SoftwareFX monitoring when changing
volume/pan/EQ – fixed
- Take Manager problems with multi-track recordings – fixed
- When playing back just recorded material while recording, the
cursor couldn’t be moved - fixed
- Diverse problems with inconsistent monitoring states – fixed
-several problems when resetting/renaming ASIO devices - fixed
-problems with MixToFile for MultiI/O -fixed
-rare bug with missing record data after a rejected take-fixed
-casual problems in O-Ton mode (jump to project start) -fixed
-wrong take naming for punchin -fixed




File handling / Export / Bouncing / Freeze
-dialog for sample rate adaption when importing audio files
- Warning about projects outside of the VIP directory now also for MP3s
- Revised FTP download dialog with multi-server administration
- Display of the audio format in the File and Object Manager
- TrackSpeed handling for faster track bouncing and CD burning, can be
switched off with
[Setup]
NoTrackSpeedForCDBurning=1
NoTrackSpeedForBouncing=1
-TrackManager: TrackFreeze switchable (multi-selection too)
-Lame MP3-Encoder for better quality
-MP3-ID3-Tag is preserved during batch processing
-TOC and ISRC tests now additionally after ISRC input or before DDP
export
-warning when deleting HDP used in open VIPs
-interleaved file import and export (for surround trackbouncing)

Bug fixes:
- DVD Audio, Digas-Export: Bounce occurrence doesn’t begin at the first
track mark, but rather at the project beginning, possibly with a digital
zero at the beginning of the DVD – fixed
-vanishing sound after several minutes when using surround
export with resampling–fixed
-problem with >2GB files when using the copy/move to project folder
options -fixed
-files outside project folder was only triggered with WAV files –fixed
-object freeze with activated handle length was restricted by neighbour
objects - fixed
-problems with Freeze and UAD/Powercore –VST plugins –fixed, and
you can now enable copying of these
plugins with „1“ or „!“ in plugin dialog



Mixer / FX / Object Editor
- Expanded use of Roosim impulse responses and vocoder samples: with the
SaveCompleteVIP command these can be optionally included when saving in
the FX preset directory of the VIP folder; they can then also be loaded
from there
- By OK or the “Apply to all” command, the object AUXs are also
completely transferred if changes are made
- In the DirectX/VST-FX plug-in dialog, the complete plug-in setups,
including pre/post and VST settings are saved
- Improved mixer-link behavior – now more neighboring tracks can be
grouped together
- Display of the active track in the mixer for better orientation (red
border on the track number); now also possible to change by clicking on
a number in the mixer
- DX/VST-FX are also now shown for surround busses in mixer slots
-warning before surround export with inconsistent device setup
-remembering of VST/VSTi plugin window positions and restore of open
DX/VST/VSTi –windows after reloading of projects



Bug fixes:
- When saving multi-band dynamics with activated solo band, only the
first solo band was used after loading – fixed
- EQ cancel didn’t work – fixed
- If a track was completely panned to the right, then on the left a drop
of –90dB resulted – fixed
- Various problems with 2-channel surround panning – fixed
- Surround Panner flickered during redraw – fixed
-RoomSim sometimes only produced silence -fixed
-MultibandDynamics: problems with MaxSubbass preset -fixed
-surround preset name wasn’t saved with the project -fixed
-surround bouncing results sometimes placed in wrong VIP
track–fixed
-mixer setup with assignment of individual tracks to surround
channel didn’t work–fixed
-Remix Agent didn’t work for mono objects + several crashes-fixed
-several RoomSim problems -fixed
-problems with object latency compensation for several DX plugins –fixed
-problems with AUX send routing after loading of MIDI files -fixed
-some multiband fixes
-no reset of surround peakmeters for object surround at object
end–fixed


MIDI /VSTi /Rewire
-Project BPM matching for MIDI Objects now accomplished without
time-stretching
- Improved beat ruler
-definable Rewire MIDI bus (use MIDI channel box in arranger)

MIDI Editor
-usage of note names in MIDI and drum editor
-channel, byte1, byte2 edit fields can now be changed via mousewheel
-note keyboard now also sends MIDI notes
- Flip-out Drum Editor tracks to change settings; also for lower track
levels
- Select all notes from a certain location onwards with:
Shift+double-click
- Select all notes of a certain pitch from a certain location onwards
with: Alt+double-click



VSTi
- Improved playback synchronization in VSTi monitoring mode
- Improved MidiThru handling of multi-output VSTi (among others) through
grouped switching processes
- Improved operation with VSTi mono outputs
- VSTi labels in Arranger with VSTi number



Bug fixes:
- Various rounding errors with MIDI events after moving Objects
/ bounce operations – fixed
- Automatic attachment of VSTi output tracks sometimes resulted
in a missing channel – fixed
- VSTis with an odd number of outputs could not use the last channel –
especially mono VSTis with only one output resulted in no sound – fixed
- Various problems with hanging notes (e.g. deleting the
previously-played note) – fixed
- Temporary higher memory use during BPM adjustment cause by Shift+mouse
movement over tempo markers - fixed
- Improved SMF import (importing the MidiTrack names as Object names,
improved functionality with tempo maps)
-VSTi sometimes missing when burning a CD-fixed
-MIDI Editor: size of contoller editor wasn’t restored after
program restart-fixed



Hardware Control Panel
- Newly-supported slot functions for track EQ bands, AUX sends and
plug-in slots (activate/deactivate) – here, with the slot, the number of
the EQ band or AUX send is adjusted
- Improved learning function: if the transport window or mixer is opened
before the control panel and if one of the “Normal Send” functions is
activated
-Mixer On/Off
-TrackVolumeFader
-TrackMute
-TrackSolo
-TrackRecRdy
-TrackAutomation
-TrackSelect
-FaderMaster
-Play
-Stop
-Record
-TrackVpot (Pan) + EQ+ AUX Sends

General:
-Copy/Cut operations without remaining Object borders
- Improved functionality for grouped Objects during multi-track editing
- English special version for Asian Windows should no longer be
necessary
- Alt+Track/Object Lock button switches an individual lock state without
taking the grouping into account
- Improved Arranger view in case track intervals were switched off
- Audio Metronome: audio device can be set up in the system options
-improved handling of object hotspot (snap to other objects or play
cursor, new command to delete hotspot)
-grabbing the object end will now snap with the object end in case the
visible distance between start and end of the object is large enough (>
50 pixel)
-pressing the right control key now allows to move the object content
with the mouse, this also works for moving the object start, thisd
feature can be switched off via ini setting:
[Factors]
ToggleKeyForChangeContent=0
-unified handling for testing valid screen positions in connection with
dual monitor setups for visualisation,
mxer, tansport window, MIDI editor and plugin windows
-vertical autoscroll for editing, improved vertical range selection
including autoscroll, autoscroll for object lasso


Bug fixes:
- Temporary mouse mode modifiers stalled when the Object Editor was
opened via double-click – fixed
- In case volume adjustment is restricted for locked Objects, this now
also applies to locked tracks
-casual problems when using jump or range extension commands to object
end –fixed
-casually missing grid after undo –fixed
-problems with feet+frames unit -fixed
-problems with Alt shortcuts and Play Loop in manager windows
–fixed




November 26, 2004 Sequoia 8.01

-Sequoia:
- Problems with fade curves after an undo – fixed
- Lack of surround presets for more than 6 channels – fixed
- ini entry allows the Crossfade Editor to work with virtual waves
[Factors]
EnableSequoiaCFEditorForVirtualWaveEditing=1


Note: with the new dongles (serial number begins with 8), under certain
conditions, Sequoia 8.01 shows a warning due to problems with the Wibu
driver included on the CD. In this case, (and only then), please install
the current driver >4.10c from the Wibu website.


-Surround:
- Surround: problematic automation in Dolby Surround Mode – fixed
- Surround: mistake-ridden Parallel Source Mirror Mode – fixed
- Problems with surround FX when loading mixer snapshots – fixed


-MIDI /VST :
-MIDI Controller now takes into account the adjusted MIDI Out channel
on the track
(especially important for volume control with the volume fader)
- Object time-stretch factor was not saved – fixed
- Problems loading MIDI files on multiple tracks – fixed
- Problems loading MIDI files without tempo info – now a default of 120
BPM is used
- Problems when using more than 16 VSTis in one project - fixed
- Deleting a VST-FX from the list of available plug-ins didn’t
work properly - fixed
- There is a Robota Drum Map in the MXSynth\Robota directory

- Various updates and bug fixes for Elastic Audio, Robota, Analog
Modelling Suite and DVDAudio

- General:
- With a new installation (and after deleting the ini file), the use of
half-transparent displays is activated by default – this is generally
recommended due to various hardware incompatibility problems
- Asks if you want to switch into 16bit mode if an error occurs upon
opening a device in 24bit; also asks to switch into 24bit mode for
recordings with more than 16bit resolution
- Punch-in problems during punch-out with Playstop – fixed
- Problems after moving the cursor in Punch-In Mode during playback –
fixed
- Problems with virtual wave editing >2GB – fixed
- Problems with Object reverb – fixed
- Warning for WAV exchange of looped Objects – fixed
- Problems with busses when loading from mixer snapshots – fixed
- EQ artifacts after changing parameters while playing – fixed
- Problems with HQ Object resampling at 192 kHz – fixed
- Object AUX Dialog Fader opens the Timestretch Dialog – fixed
- Changed shortcut: Shift-Alt-S for exclusive solo (same as
Shift-Alt-mouse-click)
- Crashed when selecting surround mixer setups during virtual wave
editing – fixed (meaning, this is no longer available)
- Possibility to enter more precise BPM value in the Transport, Project
Info, Beat and Tempo Maker Dialogs
- More precise accounting of ASIO driver latency messages for
Record-while-Playback
- Various performance updates for playback and GUI
- Various crashes – fixed